Home > Engine Management >

AEM V2 PNP Harness for 7MGTE 89-up Supra
AEM V2 PNP Harness for 7MGTE 89-up Supra
 
Additional Views:


Our Price: $299.00
Part Number: AEM V2 PNP Harness for 7MGTE 89-up Supra


Free Shipping
Availability:: Usually Ships in 5 to 7 Business Days
Product Code: DM2026


2 Step Pressure Sensor/Hose Kit*:


Air Temp Sensor*:


Boost Control Solenoid*:


Fuel Pressure Sensor*:


Included In Kit*:


Map Sensor*:


Mode Switch*:


Remote Tuning*:


Qty:  
Description
 
--THIS IS FOR A PATCH HARNESS ONLY! AEM V2 IS DISCONTINUED AND WE HAVE NO STANDALONES LEFT FOR SALE--

AEM Version 2 PNP Harness for 89-92 MK3 Supra 7M-GTE. This is a brand new a plug and play 89-92 7M-GTE Supra adapter harness. This unit can work with the stock 7M-GTE ignitor, but we recommend you upgrade to a DH61 ignitor and ignition coils/wires from an IS300, which does require that to be wired in custom on the car. Please see the 2nd picture for this item to verify you are purchasing the correct standalone. This adapter harness only fits the grey connectors with 2 rows of pins from the 89-92 MK3 Supra engine. A stock 7M-GTE basemap will be included with this unit. For this standalone it willl require the use of an AEM MAP sensor (or a GM map sensor), and an AEM air temp sensor. This wil convert your engine to a MAP based system, which is much more reliable and easier to tune. It will run the stock injectors, or aftermarket low impedance injectors, as long as the stock injector resistor is left in place. It is wired to control the factory idle speed control motor. Select from the drop down menu if you want to purchase the unit with or without the AEM 30-2130-50 map sensor and AEM 30-2010 air temp sensor

We make the harnesses here in house, which is why we have a shipping time of 5-7 business days. We spent a LOT of time and money ironing out everything needed to make this happen at this price. It's the best bang for the buck that you will find. Just about every dyno shop can tune AEM, so you will have no problem getting this unit tuned. Please call Aaron at 909-753-7385 if you have any specific questions about this item, thanks!

This unit is for MANUAL TRANSMISSION CARS ONLY.

We can remote tune these for you like we were sitting in the passenger seat! Check out our remote tuning options by looking up item DM9000. Please email [email protected] for a more accurate quote on remote tuning, because different setups vary on the time/cost to remote tune it.

Share your knowledge of this product. Be the first to write a review »