Home > 1JZ & 2JZ Swap Parts >

Denso Narrowband o2 Sensor with 18mm x 1.5
Denso Narrowband o2 Sensor with 18mm x 1.5
 
Our Price: $75.99
Part Number: Denso Narrowband o2 18mm


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: DM1704


Oxygen Sensor Type*:

Qty:  
Description
 
Denso Narrowband o2 Sensor with 18mm x 1.5 threads. This sensor can replace the narrowband stock o2 sensor on any 1JZ, 2JZ, or 7M engine. It has the same thread size/pitch as most wideband sensors, so it will thread into many aftermarket downpipes that have a wideband bung. This is a brand new Denso brand sensor, with crimp connectors to attach it to your old sensor's connector wires. Please select if you need a 3 wire or a 4 wire sensor in the drop down menu. Works with most Toyota vehicles that use a 3 wire or 4 wire o2 sensor.

3 wire sensor: The two black wires are non-polarized 12v heater wires, and the blue wire is the narrowband output.

4 wire sensor: The two black wires are non-polarized 12v heater wires, the white wire is the narrowband output, and the blue wire is usually the ecu o2 sensor ground.

Keep in mind that even a 3 wire sensor may go to a 4 pin connector on the engine harness, we go by the number of wires coming out of the sensor itself, not how many pin locations are in the stock connector.

Share your knowledge of this product. Be the first to write a review »