Home >

VVTi JZ Head Oil Feed Hose for NON-VVTi Block
VVTi JZ Head Oil Feed Hose for NON-VVTi Block
 
Our Price: $69.99
Part Number: VVTi JZ Head Oil Feed Hose


Availability:: Usually Ships in 2 to 3 Business Days
Product Code: DM3840


Cylinder Head Type*:

Engine Block Type*:

Qty:  
Description
 
VVTi JZ Head Oil Feed Hose for NON-VVTi Block
This is a Driftmotion original item, to use a VVTi 1JZ or 2JZ cylinder head on a NON-VVTi 1JZ or 2JZ block!
It was initially made for our custom 1.2jz engine, but it can be used on any NON-VVTi JZ block with a VVTi head. The 1JZ block version is just a bit shorter than the 2JZ version, because of the lower deck height on a 1JZ.

Includes a teflon lined crimped stainless hose with black outer jacket, a custom BSP fitting for the oil fitting on the block, a 16mm banjo adapter, and (2) 16mm crush washers. This hose requires your original stock 16mm VVTi banjo bolt for installation.

(This hose is NOT for VVTi blocks that have a 16mm threaded hole)

(The 1/8" BSP adapter fitting should be installed in the block using PTFE pipe sealant paste, do NOT use teflon tape. It is a tapered pipe thread, so it should be screwed in until it becomes tight, do not try to force it in until it bottoms out)

Share your knowledge of this product. Be the first to write a review »